The Amana PTH093D35AR Electronic Controls and LED Display DigiSmart Series is the only PTAC Heat and Cool Air Conditioner that comes with electronic controls which allows you to choose the exact temperature you want your room to be at without the need of adding an electronic wall thermostat. This unit comes with heat pump and a backup of electric heat so it will heat even when the temperature outside is lower than 40 degrees.

• New Installation Requires A Through The Wall Sleeve And Grille (each sold separately). For Grille Color Options Click On Specific Grille Title (to the right) Or See Air Conditioner Accessories.

BTU CALCULATION CHART:

• Electronic Controls makes it easy to choose the exact temperature desired with a touch of a button.
• Energy Management Interface Capability, including Front Desk Control - Save energy and money by centrally locating units. Eliminate wasted energy generated by cooling and heating unoccupied rooms.
• Room Freeze Protection - No more worries about bursting water pipes or broken fixtures caused by freezing temperatures. The PTAC automatically engages the heating element when temperatures fall below 40°F.
• Random Restart - In case of a power disruption, random restart circuits prevent all units from restarting at once, saving your electrical circuits.
• Compressor Restart Delay - Extends compressor life by auto-delaying any restart attempt by three minutes to allow refrigerant pressures time to equalize.
• Remote Temperature Sensing - Remote temperature sensor (optional)
• Filtered Ventilation System - Filters outside air to reduce dust, pollen and keep guests' rooms cleaner longer.
• Quiet Operation - State-of-the-art design and construction mean a quieter unit and a quieter environment for your guests.
• User-Friendly / Service-Friendly - The PTAC unit is designed for ease of use and service. Controls are easy to read, understand and activate. Main components are easily serviced; filter replacement is a simple, two-step process.

• Controls Type = Electronic Controls with LED Display
• Heat Source = Heat Pump and Electric Strip Backup.
• Cooling Capacity = 9000 BTUH
• Electric Heating BTUH at 230V = 12,000
• Electric Heating BTUH at 208V = 9,900
• Total Electric Heating Watts = 3,580 / 2.970
• Total Electric Heating Amps = 15.8 / 14.5
• Minimum Circuit Ampacity = 19.6
• Overcurrent Protection = 20 Amps
• Heat Pump Amps = 3.2 / 3.6
• Watts = 750 / 730
• BTUH = 8200 / 8000
• Voltage Rating = 230/208V 60Hz 1PH
• Overcurrent Protection = 20 Amps or 3.5 kW
• Net Weight (lbs. approx.) = 115 lbs.
• Power Cord = NEMA 6 - 20 P
• Cooling Capacity = 9,100 / 8,900
• Watts = 790 / 775
• EER = 11.5
• Minimum Circuit Ampacity = 5.1
• CFM (cool, wet coil) = High: 230 / 225 Low: 205 / 200
• CFM (dry coil) = High: 265 / 260 Low: null
• Ventilated Air CFM (fan only) = 65
• Dehumidification (pints/hour) = 2.7
• Electric Heater Size (kW) = 3.5 / 2.9
• Number of Stages = 1

PLUG FACE TYPE: