Solid bottoms on outercases
for full seal - thru the wall installation

100% Full Factory run test
on all units for high reliability and dependability. Units start the first time - every time!

Ball bearing fan motors
that are reliable, start quickly and run quietly

Multi-directional airflow to allow for cooling or heating to any part of the room. Some models contain automatic 2-way air swing feature

Easy access slide out filter
(left or right side pullout ) - has a permanent polypropylene filter mesh that is easy to remove and clean

Hydrophilic coating on Evaporator and Condenser Coils on ALL models which allows better moisture removal, increased air flow, increased heat exchange, higher efficiencies and longer compressor life.

Condensate drain spouts on ALL models to direct condensate drainage

LCDI power cords improve safety and protect against crimping or cuts on power cords

BTU CALCULATION CHART:

General Features:
Voltage: 230/208
Discharge Air: Side
Auto Air Swing: Yes
Slide-out Filter: Front Pull-Out
Approx. Chassis Wgt.: 150 Lbs.
Approx. Shipping Wgt.: 170 Lbs.

Cooling:
Capacity / BTUH: 18,000 / 17,600
Amps: 8.9/8.7
Watts: 2,020 / 1,990
CFM: 590
E.E.R: 9.0
Dehumification - pts/hr:  4.1

Electric Heat:
Capacity / BTUH: 11,000
Amps: 15.4 / 13.9
Watts: 3,555 / 2,898

Heat Pump: (Reverse cycle Heating)
Capacity / BTUH): 16,000 / 15,700
Amps: 8.0 / 8.7
Watts:1,840 / 1,790
C.O.P: 2.7
Adjustable Change-Over Thermostat: Yes
Thermostatic Drain Valve: Yes

Dimensions:
Height: 16 7/8"
Width: 26"
Depth: 30 1/2"
Depth with Front: 32 1/2"

Features:
Electrical: 6.0' LDCI power cord; Perpendicular plug; 20-amp circuit breaker
Agency Approval: U.L ( Under Writers Laboratory listed for safety ratings )
Chassis type: Slide-out for easy installation and service accessibility
Fan Speeds: 2 speeds, High and Low
Fan ONLY: Yes – high speed
Condensate drain: Yes – condensate drain spout on the wall sleeve
Window kit: Yes – optional window mount kit is included with unit

PLUG FACE TYPE: